CONE - 7/11/2023 - AULA 15

Command: CONE
Specify center point of base or [3P/2P/Ttr/Elliptical]: 0,0,0
Specify base radius or [Diameter]: 10
Specify height or [2Point/Axis endpoint/Top radius]: 15
Command:  Regenerating model.

Command: CONE
Specify center point of base or [3P/2P/Ttr/Elliptical]: 0,0,30
Specify base radius or [Diameter] <10.00>: 10
Specify height or [2Point/Axis endpoint/Top radius] <15.00>: -15
Command:

Command:
Command: SECTION
Select objects: 1 found
Select objects:
Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] <3points>: xy
Specify a point on the XY-plane <0,0,0>: 0,0,5
Command:

(ir usando o UCS para definir as diferentes direções para fazer as secções - circunferência, elipse, parábola e hipérbole)

(fazer primeio um eixo vertical e/ou horizontal para usar o seguine comando)
Command: REV
REVOLVE
Current wire frame density:  ISOLINES=4, Closed profiles creation mode = Solid
Select objects to revolve or [MOde]: 1 found
Select objects to revolve or [MOde]:
Specify axis start point or define axis by [Object/X/Y/Z] <Object>:
Specify axis endpoint:
Specify angle of revolution or [STart angle/Reverse/EXpression] <360>:
Command:

_____________________________________________________________________________________________________________________

XADREZ - 3/11/2023 - AULA 14 (acabámos na AULA 15)

Command: BOX
Specify first corner or [Center]: 0,0
Specify other corner or [Cube/Length]: 1,1,0.2
Command:  Regenerating model.
Command:  Regenerating model.
Command:  Regenerating model.


Command: CHANGE
Select objects: P
1 found
Select objects: 1 found, 2 total
Select objects: C
Specify first corner: 1
Specify opposite corner:
Invalid window specification.
Specify first corner: Specify opposite corner: 0 found
Select objects:
Specify change point or [Properties]: P
Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/TRansparency/Material/Annotative]: C
New color [Truecolor/COlorbook] <BYLAYER>: 1
Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness/TRansparency/Material/Annotative]:


(selecionar o objeto, meter o número de colunas e de linhas, e a distância)
Command: ARRAYCLASSIC
Select objects: Specify opposite corner: 4 found
Select objects:
Pick or press Esc to return to dialog or <Right-click to accept array>:
Command:
________________
box
0,0,0
1,1,0.2
copy
last

0,0
1,1

mirror
all

1,0
1,2

chprop
p

c
1

copy
all

0,0
2,0
4,0
6,0

copy
all

0,0
0,2
0,4
0,6

_______________
(se copiar e colar o texto na barra de comandos do CAD ele faz o tabuleiro automáticamente)